<BRD_APPTWELITE>

This is a board behavior assuming the same wiring as the “Extremely Simple! Standard App (App_Twelite).” It defines constants and provides functions for reading M1–M3 and BPS pins.

Constants

The following constants are defined:

static const uint8_t PIN_DI1 = mwx::PIN_DIGITAL::DIO12;
static const uint8_t PIN_DI2 = mwx::PIN_DIGITAL::DIO13;
static const uint8_t PIN_DI3 = mwx::PIN_DIGITAL::DIO11;
static const uint8_t PIN_DI4 = mwx::PIN_DIGITAL::DIO16;

static const uint8_t PIN_DO1 = mwx::PIN_DIGITAL::DIO18;
static const uint8_t PIN_DO2 = mwx::PIN_DIGITAL::DIO19;
static const uint8_t PIN_DO3 = mwx::PIN_DIGITAL::DIO4;
static const uint8_t PIN_DO4 = mwx::PIN_DIGITAL::DIO9;

static const uint8_t PIN_M1 = mwx::PIN_DIGITAL::DIO10;
static const uint8_t PIN_M2 = mwx::PIN_DIGITAL::DIO2;
static const uint8_t PIN_M3 = mwx::PIN_DIGITAL::DIO3;
static const uint8_t PIN_BPS = mwx::PIN_DIGITAL::DIO17;

static const uint8_t PIN_AI1 = mwx::PIN_ANALOGUE::A1;
static const uint8_t PIN_AI2 = mwx::PIN_ANALOGUE::A3;
static const uint8_t PIN_AI3 = mwx::PIN_ANALOGUE::A2;
static const uint8_t PIN_AI4 = mwx::PIN_ANALOGUE::A4;

You can access them like BRD_APPTWELITE::PIN_DI1.

Methods

Methods are provided to read the values of DIP SW (M1, M2, M3, BPS) pins.

inline uint8_t get_M1()
inline uint8_t get_M2()
inline uint8_t get_M3()
inline uint8_t get_BPS()
inline uint8_t get_DIPSW_BM()

The return value is not HIGH or LOW: 0 means the switch is not set (HIGH side), 1 means it is set (LOW side).

get_DIPSW_BM() returns the values of M1, M2, M3, and BPS pins in order from bit 0.