Configuration Interface by Setting Behavior

Abstraction layer for interactive mode

Setting behavior is a behavior for using configuration CUI via interactive mode. The interface for configuration is performed through serial port input and output. Interactive configuration using terminal software such as TWELITE STAGE APP / TeraTerm / screen is possible.

This behavior uses UART0 (Serial) internally. Input strings not used by the setting behavior are placed into a FIFO queue secured within the setting behavior, and Serial behaves as if referring to this queue. Note that the internal behavior differs when the setting behavior is not registered.

<STG_STD>

<STG_STD>

Minimal configuration behavior

Was this page helpful?