This is the multi-page printable view of this section. Click here to print...

Return to the regular view of this page

As of 2025-07-24

How to Initialize TWELITE Firmware

How to restore TWELITE firmware on TWELITE SPOT to the factory default state
    This guide explains how to restore the firmware written to the TWELITE mounted on the TWELITE SPOT to the factory default state using the TWELITE STAGE APP.

    Install the TWELITE STAGE APP

    Download the TWELITE STAGE SDK and extract the downloaded file directly under the C drive (for Windows).

    Obtain the Firmware

    Download the binary file from the link below and place it in the BIN folder inside the MWSTAGE folder.

    Connect to the Host

    Connect TWELITE R3 / R2

    Connect the TWELITE R3 / R2 to the 7P interface (the side labeled TWELITE).

    Connect Power

    Supply 5V power to the USB-C connector on the side.

    Connection Example (TWELITE)

    Operating the TWELITE STAGE APP

    1. Launch the TWELITE STAGE APP (TWELITE_Stage.exe).

    2. Select the TWELITE R3 / TWELITE R2 in the serial port selection screen.

    3. From the main menu, choose “Rewrite Application” -> “Select from BIN” and write the previously obtained binary (App_Wings_TWELITESPOT_BLUE_L1305_V1-3-0.bin).