Remote Control App Alternative Baud Rate Setting
Changing the baud rate used for UART communication
The Remote Control App (App_IO) uses 115200 bps as the default baud rate for UART communication, but this can be changed.
Enabling Alternative Baud Rate Setting
You can enable the alternative baud rate setting by connecting the BPS pin to GND.
BPS | Description | Baud Rate | Remarks |
|---|---|---|---|
| O | Default | 115200bps | |
| G | Override | 38400bps | Changeable via Interactive Mode |
O: not connected (OPEN), G: connected to
GND
The baud rate setting in Interactive Mode indicates the alternative baud rate. If the
BPS pin is not connected to GND, the Interactive Mode setting value will not be applied.Interactive Mode uses UART communication. When switching the baud rate of TWELITE, you must adjust the PC side baud rate before using Interactive Mode (TWELITE STAGE App Settings).