Alternative Baud Rate Setting for Extremely Simple! Standard App
Changing the baud rate used for UART communication
The Extremely Simple! Standard App (App_Twelite) uses 115200 bps as the default baud rate for UART communication, but this can be changed.
Enabling Alternative Baud Rate Setting
You can enable the alternative baud rate setting by connecting the BPS pin to GND.
BPS | Description | Baud Rate | Remarks |
|---|---|---|---|
| O | Default | 115200bps | |
| G | Override Setting | 38400bps | Can be changed via Interactive Mode |
O: Not connected (OPEN), G: Connected to GND
The baud rate setting in Interactive Mode indicates the alternative baud rate. If the
BPS pin is not connected to GND, the Interactive Mode setting will not be applied.Interactive Mode uses UART communication. When switching the baud rate of TWELITE, you must adjust the PC side baud rate before using Interactive Mode (Settings in TWELITE STAGE App).