This is the multi-page printable view of this section. Click here to print...

Return to the regular view of this page

As of 2025-07-24

TWELITE APPS (Unified) Manual

Unified firmware that consolidates all TWELITE APPS
Mainly for the TWELITE GOLD series, this firmware integrates TWELITE APPS such as the Extremely Simple! Standard App App_Twelite, allowing functionality to be switched without rewriting.

1 - TWELITE APPS (Unified) Manual

Latest Edition
TWELITE_Apps is a firmware that integrates TWELITE APPS such as the Extremely Simple! Standard App App_Twelite, allowing users to switch functionalities without rewriting. It’s like an assortment pack of TWELITE APPS.

Overview

The unified firmware bundles the following TWELITE APPS:

Switching involves a reset, but it can be performed from software without rewriting the firmware.

How to Switch

1. Open Interactive Mode

Access the Interactive Mode of TWELITE APPS and enter : (AppSel).

[CONFIG MENU/App_Wings:PARENT:0/v1-03-2/SID=8300051A]
a: (0x67720102) Application ID [HEX:32bit]
c: (18        ) Channel(s)
x: (      0x03) RF Power/Retransmissions [HEX:8bit]
b: (115200,8N1) UART Baud Alt. [XXXXX]
o: (0x00000000) Option bits [HEX:32bit]
t: (0xA5A5A5A5) Encryption key [HEX: 32bits]

[ESC]:Exit [!]:Reset System [*]:Extr Menu [:]:AppSel

2. Open the TWELITE APPS List

A menu like the following will display a list of TWELITE APPS:

[TWELITE AppSel/v0-02-1/SID=8300051A/SAVE=04-12-01]
M: AppSel           App selector (this screen)
R: Revert to DEFAULT(*DEF)
A: App_Twelite      Standar app. (App_Twelite)
B: App_IO           App for remote. (App_IO)
C: App_UART         App for SERIAL comm. (App_Uart)
D: App_Wings        Parent/Repeater (App_Wings)(*DEF)
E: App_OTA          OTA Apps for ARIA/CUE.

[!]:Reset [R]:Revert [$]:LANG=English

3. Select a TWELITE APP

Just like in Interactive Mode, you can switch to a TWELITE APP by entering the command ID letter.

For example, in the above example, entering C switches to App_Uart.

[App_UART / App for SERIAL comm. (App_Uart)]
Designed for UART (Serial) communications. UART is commonly used on MCUs.

=== Please select from the list below. Save the startup application. ===
1: Normal
2: for TWELITE UART

[BS]:Back

Initialize TWELITE APP

On the TWELITE APP list screen, entering R will revert to the default TWELITE APP.

! Clear Save Data? The next key will perform:
S: Clear App Selection.
!: Clear ALL SAVE DATA.

[BS]:Back