Commander

Operation instructions for the Commander screen

Windows macOS Linux RasPi

Overview

Commander is a feature to send serial messages to TWELITE.

Operation

The first screen of the Commander displays important notes.

At the top of the screen, there are tabs represented by text, which you can navigate by clicking with the mouse to switch between tab screens.

Operation	Description
[ A ]	Move tab (left)
[ A ] Long press	Exit this screen and return to the selection screen.
[ B ]	No assignment
[ B ] Long press	No assignment
[ C ]	Move tab (right)
[ C ] Long press	Control the reset pin of TWELITE to reset it.
`ESC`	Exit this screen and return to the selection screen.

Tab: TWELITE

This screen generates and sends the 0x80 command of the Standard App (App_Twelite).

Make sure the connected TWELITE has App_Twelite or parent/relay app (App_Wings) programmed, and after setting the application ID and channel, confirm that messages are being received from the communication partner.

Item	Description
Destination	Specify the TWELITE to send to. If you are a child device, specify “Parent:0”. If you are a parent device, specify “All children = 0x78” or a specific child ID (can be specified from 1 to 8).
DI1..DI4	Settings state from DI1 to DI4. ■ means selected (LOW = GND level), □ means (HIGH = VCC level). Please specify SEL in the next item.
SEL	Selection bits for each DI. (If 0, the DI specification is ignored; if 1, the specification is enabled.)
PWM1..4	Set the PWM duty ratio. 0 corresponds to GND level, 1024 (100%) corresponds to VCC level. PWM ports set to N.A. will not be changed. (Note: On the MW-STA-KIT-0/MW-STA-SOLO-0 boards, PWM1 is pulled up to VCC, so the LED lights brightest at 0 and turns off at 100%.)

Commands are generated each time an item is changed. Pressing the send button will resend the command with the current settings.

Tab: NOTICE

This screen generates the LED control command of the Notification PAL (NOTICE PAL).

Make sure the connected TWELITE has App_Wings programmed, and after setting the application ID and channel, confirm that messages are being received from the communication partner.

Item	Description
Destination	Specify the ID of the TWELITE PAL to send to. Valid range is 1 to 8.
Color	Specify the lighting color from 7 colors. There are two types of white: one is RGB mixed color, and the other is a single white LED lit.
Brightness	Specify from 0 to 15. 0 means off.
Lighting/Blinking	Select lighting or blinking pattern.
Lighting Time	Automatically turns off after a certain time has passed since the command was issued.
Turn off (x)	Generate a turn-off message to turn off the LED.
Turn on (SPACE)	Send the current settings to turn on the LED.

Commands are generated each time an item is changed. Pressing the send button will resend the command with the current settings.

Display at the bottom of the screen

At the bottom of the screen, the timestamp when the command was generated and the command starting with : are displayed. The clipboard copies the contents of this screen.