Glancer
Windows macOS Linux RasPi
Overview
Glancer provides a simplified display of the information contained in received messages.
By programming the connected TWELITE with App_Wings, it can display information received from communication partners’ TWELITE devices (App_Twelite, TWELITE PAL, … as long as the application ID and frequency channel match, mixed operation is possible).
Operation
Use by switching between the list display screen and the selection display screen.
List Display
Example of list display
Lists information from communication partners.
Displayed content includes message type, logical device ID, serial ID, LQI (Lq), power voltage (if included in the information), and timestamp.
| Operation | Description |
|---|---|
| [ A ] | Move to the previous item in the list. |
| [ A ]Long press | Exit this screen and return to the previous menu. |
| [ B ] | Switch to selection display. |
| [ B ]Long press | Sort items.The sort key changes sequentially each time sorting is performed. |
| [ C ] | Move to the next item in the list. |
| [ C ]Long press | Control the TWELITE reset pin and reset it. |
ESC | Exit this screen. |
Selection Display
Example of selection display
By moving items and highlighting one in the list display, then performing a selection operation, you transition to this screen. It shows information related to a specific communication partner in order of arrival.
The number of received packets and the average LQI since selection are displayed.
| Operation | Description |
|---|---|
| [ A ] | No assignment |
| [ A ]Long press | Exit this screen and return to the previous menu. |
| [ B ] | No assignment |
| [ B ]Long press | No assignment |
| [ C ] | No assignment |
| [ C ]Long press | Control the TWELITE reset pin and reset it. |
ESC | Return to the list display screen. |