Terminal

Operation instructions for the Terminal screen

Windows macOS Linux RasPi

Example of the Terminal screen

Overview

A general VT100-compatible serial terminal.

Supports TWELITE interactive mode and reset control.

Operations

Operation	Description
[ A ]	Input the `+ + +` sequence (interactive mode)
[ A ] Long press	Exit this screen and return to the previous menu.
[ B ]	Display a partial area of the first screen with a larger font. The area is selected so that the cursor is visible on the screen, but depending on the screen output, the desired part may not be visible.
[ B ] Long press	Toggle word wrap ON/OFF. By default, word wrap is enabled, but you can also display without wrapping. Characters beyond the right edge of the screen will not be displayed.
[ C ]	Move to the firmware update screen. During firmware development, source code modification, operation check, build & write are frequently performed, so a shortcut is provided.
[ C ] Long press	Control and reset the TWELITE reset pin.
`ESC` `ESC`	Press the `ESC` key twice quickly to exit this screen. ※ In most screens, pressing the `ESC` key once exits the screen, but in the terminal, a single `ESC` key input is used for other purposes, so double input is assigned.